Advanced Power Drives
  • APD Documentation and FAQs
  • Product Notices
    • 04/01/2023 - Overvoltage Issue
  • Downloads
    • Configurator
    • Flashing Tool
    • Firmware
      • UHV and HV Pro Firmware
      • F Series Production Firmware
      • F Series [BETA] Firmware
    • 3D Model Downloads
  • Product Guides
    • UHV ESC
      • Quick Start Guide
      • Advanced Setup
      • UHV Configuration Options
      • UART Telemetry Output
      • Troubleshooting
      • Datasheets
      • Firmware Installation
    • HV Pro ESC
      • Quick Start Guide
      • Advanced Setup
      • HV Pro Configuration Options
      • UART Telemetry Output
      • Troubleshooting
      • Datasheets
      • Firmware Installation
    • F Series ESC
      • Physical features
      • Quick Start Guide
      • Advanced Setup
      • F Series Configuration Options
      • Troubleshooting
      • Datasheets
      • Production Firmware Install
      • Legacy Firmware Install
    • Power Distribution
      • Datasheets
    • Help
    • Warranty
Powered by GitBook
On this page
  • 2.3.2 - 18th Mar 2024 - Latest
  • 2.3.1 - 22nd Feb 2023
  • 2.3.0 - 4th Jan 2023
  • Legacy Production Firmware
  • 40F3 Firmware - Legacy
  • 80F3 100F3 120F3 Firmware - Legacy
  • 200F3 Firmware - Legacy
  1. Downloads
  2. Firmware

F Series Production Firmware

Production firmware releases for F Series ESCs.

PreviousUHV and HV Pro FirmwareNextF Series [BETA] Firmware

Last updated 1 year ago

2.3.2 - 18th Mar 2024 - Latest

Compatible bootloader versions are 1.2.0. onwards.

Changes

  • Thermal limiting behaviour improved to increase the smoothness of limit application once over temperature event occurs.

  • 200F3 V2 support for RPM square wave output for use with external governors.

  • 40F3 voltage measurement accuracy improvements.

2.3.1 - 22nd Feb 2023

Compatible bootloader versions are 1.2.0. onwards.

Changes

  • Start-up smoothness changes.

  • Start power-setting characteristic improvements.

2.3.0 - 4th Jan 2023

Compatible bootloader versions are 1.2.0. onwards.

Changes

  • Non-Beta Release of Version 2 configuration platform.

  • Over-voltage calculations are performed dynamically rather than solely on unit boot.

  • Dynamic idle improvements.

Legacy Production Firmware

The following V1 firmware is non-configurable.

40F3 Firmware - Legacy

Standard firmware for 40F3 units. This firmware is installed in Production units.

80F3 100F3 120F3 Firmware - Legacy

V1 firmware for 80F3, 100F3 and 120F3 units. This firmware is installed in Production units.

200F3 Firmware - Legacy

V1 firmware for 200F3 units. This firmware is installed in Production units.

Firmware can be downloaded and installed through the APD Flashing Tool
Firmware can be downloaded and installed through the APD Flashing Tool
Firmware can be downloaded and installed through the APD Flashing Tool
42KB
40F3 Standard.zip
archive
42KB
80F3 100F3 120F3 Standard.zip
archive
43KB
200F3 Standard.zip
archive