The HV Pro Series of ESCs are APD's high performance, small footprint products, offering maximum results for your use case.
The APD developed (proprietary) firmware ensures unmatched low-throttle and starting characteristics. Ultra-smooth starting and ramp-up characteristics ensure your drive-train is safe. Features include PWM-frequency dithering to avoid PWM-commutation synchronisation, adaptive motor timing advance and proprietary developed Active Phase-Current De-magnetisation (APCD). APCD, along with Synchronous rectification ensure maximum ESC efficiency is achieved.
Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability.
Aerospace-grade ceramic capacitor bank for lowest possible ESR and maximum reliability. No more dried up electrolytic failures.
The APD HV Pro comes in 4 variants: 14S 240A, 16S 400A, 20S 300A, 24S 200A
Up to 400 Amp continuous current*
Up to 600 Amp burst current
Up to 24S capable
True 12-Bit throttle resolution
Highest power density
Standard PWM input up to 480Hz
Auto PWM frequency
Auto Timing Advance
On-board 16 MB Flash memory
Data-logging for Voltage, Current, Temp, Input Duty, Output Duty, eRPM, Phase Current
Firmware upgradable through USB port
Dimensions: 96 mm(L) x 52 mm(W) x 26 mm(H)
Isolated Input and Output (Can be configured for RPM)
Weight: 0.26 KG
Multiple operation modes:
Incremental + Linear power ramp control
Fixed Wing Aircraft
Instantaneous Input = Output Step Response
Soft-start for drive-train protection
Same as normal except for active torque control, which applies a motor phase current limit that ramps proportionally with higher motor duty-cycles
Normal mode with reverse capabilities
Watercraft requiring reverse
*Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 180 seconds with 10 m/s airflow